Zwischen zwei Zertifizierungen wählen

Sollte man zuerst CompTIA A+ oder Network+ machen?

Beginne mit A+, wenn du ohne Vorerfahrung in die IT einsteigst, und mit Network+, wenn du bereits im Support arbeitest und dich in Richtung Infrastruktur weiterentwickeln willst. A+ ist breiter aufgestellt und weniger tief, Network+ ist enger gefasst und geht deutlich mehr in die Tiefe.

Wo sie sich überschneiden

Der gemeinsame Boden

Beide Zertifizierungen decken Netzwerkgrundlagen ab, und diese Überschneidung ist real: A+ enthält eine eigene Networking-Domäne sowie Netzwerk-Troubleshooting, während Network+ genau dieses Thema zu seinem gesamten Prüfungsstoff macht. Wer zuerst A+ lernt, findet bei Network+ also einen guten Teil des Stoffs bereits vertraut vor.

  • A+ deckt das breitere Feld abA+ umfasst neun Domänen – Hardware, Betriebssysteme, mobile Geräte, Virtualisierung, Sicherheit, Software- und Hardware-Troubleshooting sowie betriebliche Abläufe. Das Ziel ist, dich vielseitig am Helpdesk einsetzbar zu machen, statt dich zum Experten für ein einzelnes Thema zu machen.
  • Network+ geht bei einem Thema in die TiefeNetwork+ konzentriert sich auf fünf Domänen rund um Netzwerkkonzepte, Implementierung, Betrieb, Sicherheit und Troubleshooting. Während A+ prüft, ob du ein Netzwerkproblem erkennen kannst, prüft Network+, ob du das Netzwerk selbst entwerfen, absichern und diagnostizieren kannst.
  • A+ erfordert mehr PrüfungstermineA+ besteht aus zwei Prüfungen, Core 1 und Core 2, mit jeweils bis zu 90 Fragen in 90 Minuten und einer Bestehensgrenze von 675 Punkten. Network+ ist eine einzelne 90-minütige Prüfung mit einer Bestehensgrenze von 720 Punkten. Das macht sich sowohl beim Budget als auch bei der Terminplanung bemerkbar.
  • Arbeitgeber lesen beide unterschiedlichA+ signalisiert, dass man dir Anwender und Endgeräte anvertrauen kann. Network+ signalisiert, dass man dir die Infrastruktur anvertrauen kann. Keine der beiden Zertifizierungen ersetzt die andere, und viele Stellenanzeigen führen A+ als Mindestvoraussetzung und Network+ als Weiterentwicklung.
In welcher Reihenfolge

In dieser Reihenfolge ablegen

Der übliche Weg ist A+, dann Network+, dann Security+. A+ zu überspringen ist sinnvoll, wenn du bereits täglich praktischen Support leistest; Network+ vor Security+ zu überspringen ist es nicht, da Security+ Netzwerkwissen voraussetzt, das dort nicht vermittelt wird.

Try three questions. Understand every answer.

Original English practice examples, with answers and explanations available here. No account required. These are independent teaching examples, not official exam questions or exam dumps.

Question 1 of 3 · A+ · Mobile devices and computer hardware

A laptop charges normally with its original USB-C adapter. On a compatible dock, data and video work, but the battery drains under load. The dock delivers less power than the laptop requires. Which change addresses the evidence with the least disruption?

Answer and explanation

Best answer: Use a supported dock or power arrangement with sufficient delivered wattage

The measured power shortfall explains discharge under load even though data and video work. Use a supported arrangement that meets the laptop power requirement.

Why the other choices fit less well

Battery replacement is premature when the measured charging input is insufficient. Stable video does not indicate a graphics-driver fault; reducing refresh rate without checking the required and delivered wattage does not establish a supported charging arrangement.

USB-IF: power delivery

Question 2 of 3 · Network+ · Network architecture and protocols

Small packets cross a VPN, but larger packets fail. A capture shows that fragmentation is blocked, while the physical links remain healthy. Which investigation best targets the size-dependent failure?

Answer and explanation

Best answer: Path MTU and tunnel overhead

Tunnel overhead reduces available packet size. Examine the path MTU and the handling of packets that exceed it before changing unrelated services.

Why the other choices fit less well

DNS caching, application timeout, and DHCP lease duration do not explain a verified packet-size boundary across the tunnel.

IETF: path MTU discovery

Question 3 of 3 · A+ · Operational procedures

A user asks you to reset a slow laptop. Their only copy of an important folder is on its internal drive. What should you do before starting a potentially destructive reset?

Answer and explanation

Best answer: Back up the required files and verify that the backup can be read

Preserve the required data and verify the backup before a destructive operation. Confirm the destination and that the files open; an unverified backup is an assumption.

Why the other choices fit less well

A reset can remove data before recovery is possible. A renamed folder remains on the same drive. Cloud sync must be checked rather than presumed to cover local files.

Microsoft: reset your PC

Choose your next step

Free practice questions: 20 for A+; 20 for Network+. Create a free account to save your progress. No card required.

Paid question-bank access is a one-time purchase, with no recurring subscription. Official exam registration, vouchers and provider labs are separate from CertSprint practice.