Choisir entre deux certifications

Faut-il passer d'abord le CompTIA A+ ou le Network+ ?

Passez d'abord A+ si vous débutez dans l'IT sans expérience préalable, et Network+ en premier si vous travaillez déjà en support et souhaitez évoluer vers l'infrastructure. A+ est plus large mais moins approfondi ; Network+ est plus ciblé mais va plus loin.

Où elles se chevauchent

Le terrain commun

Les deux couvrent les fondamentaux réseau, et le chevauchement est réel : A+ comprend un domaine Réseau ainsi que du dépannage réseau, tandis que Network+ traite ce même terrain comme sujet à part entière. Étudier A+ en premier signifie qu'une partie non négligeable de Network+ sera déjà familière plutôt que nouvelle.

  • A+ ratisse plus largeA+ couvre neuf domaines — matériel, systèmes d'exploitation, appareils mobiles, virtualisation, sécurité, dépannage logiciel et matériel, et procédures opérationnelles. Il est conçu pour vous rendre polyvalent sur un help desk plutôt qu'expert dans un domaine unique.
  • Network+ va plus loin sur un seul sujetNetwork+ se concentre sur cinq domaines couvrant les concepts réseau, leur mise en œuvre, l'exploitation, la sécurité et le dépannage. Là où A+ demande si vous pouvez identifier un problème réseau, Network+ demande si vous pouvez concevoir, sécuriser et diagnostiquer le réseau lui-même.
  • A+ demande plus de séancesA+ nécessite deux examens, Core 1 et Core 2, chacun jusqu'à 90 questions en 90 minutes avec un seuil de réussite à 675. Network+ est un examen unique de 90 minutes avec un seuil de réussite à 720. Cette différence compte à la fois pour le budget et pour l'organisation.
  • Les employeurs ne les lisent pas de la même façonA+ signale que l'on peut vous confier des utilisateurs et des postes de travail. Network+ signale que l'on peut vous confier l'infrastructure. Aucun des deux ne remplace l'autre, et de nombreux postes citent A+ comme prérequis minimal et Network+ comme évolution.
Dans quel ordre

Les passer dans l'ordre

Le parcours classique est A+, puis Network+, puis Security+. Sauter A+ est raisonnable si vous faites déjà du support pratique au quotidien ; sauter Network+ avant Security+ ne l'est pas, car Security+ suppose des connaissances réseau qu'il n'enseigne pas.

Try three questions. Understand every answer.

Original English practice examples, with answers and explanations available here. No account required. These are independent teaching examples, not official exam questions or exam dumps.

Question 1 of 3 · A+ · Mobile devices and computer hardware

A laptop charges normally with its original USB-C adapter. On a compatible dock, data and video work, but the battery drains under load. The dock delivers less power than the laptop requires. Which change addresses the evidence with the least disruption?

Answer and explanation

Best answer: Use a supported dock or power arrangement with sufficient delivered wattage

The measured power shortfall explains discharge under load even though data and video work. Use a supported arrangement that meets the laptop power requirement.

Why the other choices fit less well

Battery replacement is premature when the measured charging input is insufficient. Stable video does not indicate a graphics-driver fault; reducing refresh rate without checking the required and delivered wattage does not establish a supported charging arrangement.

USB-IF: power delivery

Question 2 of 3 · Network+ · Network architecture and protocols

Small packets cross a VPN, but larger packets fail. A capture shows that fragmentation is blocked, while the physical links remain healthy. Which investigation best targets the size-dependent failure?

Answer and explanation

Best answer: Path MTU and tunnel overhead

Tunnel overhead reduces available packet size. Examine the path MTU and the handling of packets that exceed it before changing unrelated services.

Why the other choices fit less well

DNS caching, application timeout, and DHCP lease duration do not explain a verified packet-size boundary across the tunnel.

IETF: path MTU discovery

Question 3 of 3 · A+ · Operational procedures

A user asks you to reset a slow laptop. Their only copy of an important folder is on its internal drive. What should you do before starting a potentially destructive reset?

Answer and explanation

Best answer: Back up the required files and verify that the backup can be read

Preserve the required data and verify the backup before a destructive operation. Confirm the destination and that the files open; an unverified backup is an assumption.

Why the other choices fit less well

A reset can remove data before recovery is possible. A renamed folder remains on the same drive. Cloud sync must be checked rather than presumed to cover local files.

Microsoft: reset your PC

Choose your next step

Free practice questions: 20 for A+; 20 for Network+. Create a free account to save your progress. No card required.

Paid question-bank access is a one-time purchase, with no recurring subscription. Official exam registration, vouchers and provider labs are separate from CertSprint practice.